Fence Posts
    Franklin Industries Co.'s Famous Gold Crown and Green/Light Grey Fence Posts are made from High-Strength Rail Steel and coated with high quality enamel paints to last years longer than other posts in the field. Even unfinished posts, used in silt fences, orchards, and vineyards, benefit from rail steel's inherent weathering resistance. For posts that will last for decades, hot dip galvanizing is also available.

    Listed below is a table of steel fence posts specifications followed by detailed specifications of dimensions for both Studded "T" Fence Posts as well as Self Fastening "U" Fence Posts.

Steel Fence Posts Specifications

Material	Posts are produced from standard "T" rails weighing 91 lbs/yd or more according to ASTM A499, Grade 60; or ASTM A702(1.33 lbs/ft only).
Finish	Posts are either painted with baked green enamel, hot dip galvanized per ASTM A123, or unfinished.
Studded "T" Posts	The weight of each post is 0.95, 1.25 or 1.33 lbs/ft. Studs are spaced uniformly along the length of the "T" shaped post.
Self-Fastening "U" Posts	The weight is 1.12 lbs/ft. Lugs and holes are punched for easy wire attachment along the length of the "U" shaped post.
Anchor Plates	Standard on 1.25 and 1.33 lbs/ft Studded "T" Posts, securely swaged on the studs, and on 1.12 Self Fastening "U" Posts attached with rivets.
Wire Fasteners	Five pre-formed wire fasteners are included with each painted "T" post. Fasteners are not required with "U" Posts.
Bundling	Painted posts are banded in 5 piece sub-bundles in 200 piece master bundles, on blocking.

Studded "T" Post

Studded "T" Post Properties
Weight	Dimensions (Nominal)			Area
Lbs/Ft	"A"	"B"	"C"	IN²
0.95	1.465	1.125	0.125	0.279
1.25	1.625	1.375	0.125	0.368
1.33	1.635	1.375	0.130	0.391

Self Fastening "U" Post

Self Fastening "U" Post Properties
Weight	Dimensions (Nominal)			Area
Lbs/Ft	"A"	"B"	"C"	IN²
1.12	0.841	2.037	0.112	0.329

Franklin Industries | P.O. Box 671 | Franklin, PA 16323
Telephone (888) 437-3726     Fax (814) 432-7556